Solar Charge Controller SDCC-5 10A / 12v 24v

Solar Charge Controller SDCC-5 10A / 12v 24v

Wind / Solar Charge Controller SDCC-5 10A / 12v 24v: (PWM) technology to regulate battery voltage to prevent overcharge. This generation of voltage regulation saw the end of the need for bulky heat sinks to dissipate excess energy generated by the windcharger and, more importantly for the lifetime of the windcharger, introduced speed limiting to the turbine when the battery is full.

Key Product Features:

Type - SDCC-10
Rated charge current:10A
Rated load current: 10A
Work voltage: 12V / 24V
Over load, short circuit protection: 1.25 rated load current 60sec, 1.5 rated loads current 5sec, over load protection action. Ý3 Rated load current short circuit protection action.
Quiescent current: 6 mA
Charge circuit voltage drop: 26V
Load circuit voltage drop: 15V
Over voltage protection: 17V; ×2/24V
Work temperature Industry stage: -35 DEGC to +55 DegC Commercial stage -5 DegC to +50DegC
Boost charge voltage: 14.6V; ×2/24V (keep 10min)
Direct charge voltage: 14.4V; ×2/24V (keep 10min)
Float charge voltage: 13.6V; ×2/24V
charge return voltage: 13.2v
Temperature compensation -5mv (Boost charge, Direct charge, Float charge, charge return voltage);
Lower voltage indicate: 12.0V ×2/24V
Over discharge voltage: 11.1V no load- modified voltage by discharge rate of battery ×2/24V
Over discharge return voltage: 13.1 V; ×2/24V
Over-discharge pressed return voltage: 12.4V; ×2/24V
Control mode PWM charge mode; modified discharge voltage by the discharge rate