The Rutland 504 wind turbine is ideal for charging batteries on board boats no larger than 10m in length with battery banks typically around 100Ah. While the boat is unattended the Rutland 504 will be replenishing your batteries to fully charged capacity. During longer spells on board the Rutland 504 will provide invaluable topping up so you can comfortably use the cabin lights and other low energy appliances. The Rutland 504 is so lightweight, portable and easy to handle. A portable land tower and rigging kit is available on this site.
Rutland 504 Marine Mounting Kit
Marlec’s 504 Marine Mounting Kit is a 2m (6.5ft) pole kit manufactured from stainless steel and supplied in 2 x 1metre sections with joiner. Two L shaped deck fixing plates are supplied to support the pole and attach to the deck along with brackets to which guys or stays should be attached. Solid stays are recommended to provide a suitably rigid mount for the wind turbine, these are not included owing to the individual nature of the lengths required on each boat.
Want to construct a pole of your own ? A pole can be constructed for deck fixing using a continuous length of stainless steel or aluminium tube, a minimum 2 metre length is recommended. Note that the mounting tube dimensions must be 31.7mm internal diameter and no more than 38mm outer diameter. Also available from Marlec are single 1M and 500mm tube sections for you adapt to your own mounting design
Kit Includes:
1 x Rutland 504 Wind Turbine
1 x HRS503 Voltage Regulator (option for solar input, will require solar diode)
1 x 505 Marine Mounting Kit
16m x 2 core cable
Key Product Data:
| |
No comments:
Post a Comment