Fujitsu Air Conditioning VRF CONTROLS & ACCESSORIES

Part Number	Description
UTYRNRYZ3	Wired Remote Controller (Touch panel)
UTYRSKY	Simple Remote Controller (with Master Control)
UTYRHKY	Simple Remote Controller (without Master Control)
UTYRSRY	New Simple Remote Controller (with Master Control)
UTYRHRY	New Simple Remote Controller (without Master Control)
UTYLNHY	Wireless Remote Controller
UTYRCRYZ1	Compact Remote Controller
UTYCGGY	Group Remote Controller
UTYDCGY	Central Remote Controller
UTYDCGYZ1	New Central Remote Controller
UTYDTGYZ1	Touch Panel Controller
UTYPTGXA	Electricity charge apportionment (for UTY-DTGYZ1)
UTYALGXZ1	System Controller Lite
UTYPLGXA2	Electricity charge apportionment (for UTY-ALGXZ1)
UTYLRHYB1	IR Receiver Kit for 4way Cassette
UTYLBHXD	IR Receiver Kit for Circular Flow Cassette
UTYTRHX	IR Receiver Kit for 3D Flow Cassette
UTYTRHX	IR Receiver Kit for Ducted Models (Except GATH)
UTBYWC	IR Reciver Unit for GATH Ducted Units
UTYSHZXC	Human Sensor for Circular Flow Cassette
UTYABGXZ1	BACnet Gateway (software)Up-date
UTYVBGX	BACnet Gateway (Hardware)
UTYVLGX	Network Convertor for "LONWORKS"
FJRCWIFI2	Wireless Lan Interface
FJRCKNX1i	KNX Interface
FJRCMBS1	Modbus Interface
UTYTEKX	External Switch Controller
FJACWIFI1	IntesisHome for Fujitsu RAC and VRF systems
FJIRWIFI1	IntesisHome Universal IR Controller
UTYTERX	External Switch Controller
UTYVGGXZ1	Network Convertor
UTYVSGXZ1	Signal Amplifier
UTYVKGX	KNX convertor (for VRF System)
UTYVKSX	KNX convertor (for VRF Indoor Unit)
UTYVTGX	Single Split Convertor
UTYVTGXV	Single Split Convertor (AC power supply type)
UTYVMGX	Modbus Convertor
UTYXWZXZA	For Central Remote Controller / Touch Panel Controller
UTYXWZXZB	For Indoor unit / For RB unit
UTYXWZXZC	For Indoor unit
UTYXWZXZD	For Indoor unit
UTYXWZXZE	For Indoor unit
UTYXWZXZ6	For RB unit / For Outdoor unit
UTYXWZXZ7	For Indoor unit / For Central Remote Controller
UTYXWZXZ8	For Central Remote Controller
UTYXWZXZ9	For Outdoor unit
UTDRF204	Round Flange for medium static pressure ducted LM/KM Units
UTDSF045T	Square Flange for medium static pressure ducted LM/KM Units
UTYXSZX	Remote Sensor Unit(for All Duct type)
UTDLF25NA	Long Life Filter for medium static pressure ducted LM/KM Units
UTDLF60KA	Long Life Filter for HSP Duct
UTDGXTAW	Auto Louver Grille for Slim Duct 07-14 / Compact Slim Duct 07-14
UTDGXTBW	Auto Louver Grille for Slim Duct 18 / Compact Slim Duct 18
UTDGXTCW	Auto Louver Grille for Slim Duct 24 / Compact Slim Duct 24
UTZPX1NBA	Drain Pump Unit for ARXA024-045GLEH
UTZVXAA	Fresh Air Intake Kit for Compact Cassette
UTZVXRA	Fresh Air Intake Kit for Cassette
UTRYDZB	Air Outlet Shutter Plate for Compact Cassette
UTRYDZK	Air Outlet Shutter Plate (for Cassette type)
UTRDPB24T	Drain Pump Unit (for Ceiling type)

Contact Us For Fujitsu VRF Parts:

Orion Air Conditioning And Refrigeration Limited
10 Grisedale Court
Woburn Road Industrial Estate
Kempston
Bedfordshire
MK42 7EE
United Kingdom

Sales & Spares: +44 (0)1234 841221 
Fax: +44 (0)1234 852662
Email: info@orionair.co.uk
SKYPE:  ORIONAIRSALES




Alternatively, use this contact form and we will get back to you as soon as possible
Opening Hours:  9.00 to 17:00 GMT Monday To Friday

SERVICE MANUAL AND FAULT CODES FOR SAMSUNG AIR CONDITIONING MODELS

 

SERVICE MANUAL AND FAULT CODES FOR SAMSUNG AIR CONDITIONING MODELS

https://drive.google.com/file/d/1npo8T59oFy39vWbR3_6fx8mmr3YM59Y5/view?usp=sharing

SAMSUNG MODELS:

WINDOW WALL:

AW09P1B, AW12P1B, AW18P1B, AW09P1HEA, AW12P1HEA, AW18P1HEA, AW24P1HEA AZ09PHB, AZ12PHA, AZ09PHHEA, AZ12PHHEA

5 WAY:

 SC09ZAB/7/8, SC12ZAB/7/8, SC18ZA(B)9, SC24TA(B)5 SH09ZAB/7/8, SH12ZAB/7/8, SH18ZA(B), SH24TA(B)5

DELUX:

SC09ZK8, SC12ZKG, SC18ZKO, SC24TK6, SC30OZC1/2 SC09ZS2, SC12ZS4, SC18ZS0A, SC24ZS6A, SH09ZK8, SH12ZKG, SH18ZKO, SH24TK6, SH30ZC1/2 SH09ZS2, SH12ZS4, SH18ZS0, SH24TS6

PREMIUM:

SH09ZP2/A, SH12ZP4/A, SH18ZP0(A), SH24TP6(A) 

CLASSIC:

SC09ZWH, SC12ZWH, SC18ZWJ, SC24ZW6, SH09ZWH, SH12ZWH, SH18ZWJ, SH24ZW6

PRESTIGE:

AS12HM3, AS18HM3, AS24HM3

FORTE :

AS09FAXFA, AS12FAXFA, AS18FAMID, AS24FAMID, AS30WB,AQ09FAXFA, AQ12FAXFA, AQ18FAMID, AQ24FAMID, AQ30WB AQ09NAMID, AQ12NAMID, AQ18NAMID, AQ24NAMID 

AQ09FCMID, AQ12FCMID, AQ18FEMID, AQ24FCMID

FORTE INVERTER:

AQV09NSAN, AQV12NSAN, AQV18NSAN, AQV24NSAN, AQV09FCN, AQV12FCN, AQV18FCN, AQV24FCN

MODERATO:

AQ09MWBNSER, AQ12MWBNSER, AQ18MWBNSER, AQ24WBNSER

AQ09MWBNAND, AQ12MWBNAND, AQ18MWBNAND, AQ24MWBNAND

AQ09MWBNMID, AQ12MWBNMID, AQ18MWBNMID, AQ24MWBNMID

AQ09MSBNSEU,AQ12MSBNSEU,  AQ18MSBNSEU,  AQ24MSBNSEU VIVACE                      -         

AQ09VB(W)AN, AQ12VB(W)AN, AQ18VB(W)AN, AQ24VB(W)AN

CASSETTE:

CH052EZMC, CH070EZMC, CH105EZMC, CH140EZMC

CH070EZM, CH105EZM1, CH140EZM1

DUCTED:

DH105GZM, DH140GZM, DH175GZM HH105EZM, HH140EZM, HH175EZM 

DH070EZM,

Carrier spare parts and commodities for heating and air conditioning

 

Link to Carrier spare parts list PDF:

https://drive.google.com/file/d/0B4UVnt4WTnAOcVZmYTVsWTZNVXc/view?usp=sharing

Contact Us:

 

Orion Air Conditioning And Refrigeration Limited

10 Grisedale Court

Woburn Road Industrial Estate

Kempston

Bedfordshire

MK42 7EE

United Kingdom

Sales And Service: +44 (0)1234 841221 

Fax: +44 (0)1234 852662

Email: info@orionair.co.uk

SKYPE:  ORIONAIRSALES

Opening Hours:

9.00 to 17:00 GMT Monday To Friday

 

Hyundai Generator Fault Codes, Troubleshooting and Maintenance

 

 

 

Error Code	Name	Probable Cause(s)
E05	Overload protection	When a motor overload is detected by the electronic thermal function, the inverter trips and turns OFF its output.
E06	Braking resistor overload	When the regenerative braking resistor exceeds the usage time allowance or usage ratio, the inverter trips and turns OFF its output to the motor.
E07	Over voltage protection	When the DC bus voltage exceeds a threshold, due to regenerative energy from the motor.
E08	EEPROM error	When the built-in EEPROM memory has problems due to noise or excessive temperature, the inverter trips and turns OFF its output to the motor.
E09	Under-voltage error	A decrease of internal DC bus voltage below a threshold results in a control circuit fault. This condition can also generate excessive motor heat or cause low torque. The inverter trips and turns OFF its output.
E10	CT (current transformer) error	If a strong source of electrical interference is close to the inverter or a fault occurs in a built-in CT (current transformer), the inverter trips and turns its output OFF.
E11	CPU error	A malfunction in the built-in CPU has occurred, so the inverter trips and turns OFF its output to the motor.
E12	External trip	A signal on an intelligent input terminal config- ured as EXT has occurred. The inverter trips and turns OFF the output to the motor.
E13	USP	When the Unattended Start Protection (USP) is enabled, an error occurred when power is applied while a Run signal is present. The inverter trips and does not go into Run Mode until the error is cleared.
E14	Ground fault	The inverter is protected by the detection of ground faults between the inverter output and the motor during powerup tests. This feature protects the inverter, and does not protect humans.
E15	Input over-voltage	When the input voltage is higher than the specified value, it is detected 60 seconds after powerup and the inverter trips and turns OFF its output.
E16	Instantaneous power failure	When the input power is removed for more than 15ms, the inverter trips and the output to the motor turns OFF. If the power failure duration exceeds the duration set in parameter B002, it is consid- ered a power failure. When input power is restored, the inverter restarts if the Run signal is present, depending on the restart condition.
E21	Inverter thermal trip	When the inverter internal temperature is above the threshold, the thermal sensor in the inverter module detects the excessive temperature of the power devices and trips, turning the inverter output OFF.

Error Code	Name	Probable Cause(s)
E23	Gate array error	An internal inverter error has occurred in commu- nications between the CPU and gate array IC.
E24	Phase failure detection	One of three lines of the 3-phase power is missing.
E30	IGBT error	When an instantaneous over-current condition occurs on any IGBT (output transistor) device, the inverter alarm trips. then it turns the outputs OFF in order to protect the circuitry.
E35	Thermistor	When a thermistor is connected to terminals [THM] and [CM1] and the inverter has sensed the temperature is too high, the inverter trips and turns OFF the output.
E36	Brake error	When the inverter releases the brake and cannot detect whether the external brake is ON or OFF within the waiting time (set by parameter B024), the inverter trips and turns OFF the output to the motor.
––––	Under-voltage (brownout) with output shutoff	Due to low input voltage, the inverter turns its output OFF and tries to restart. If it fails to restart, then the alarm trips to record the under-voltage error event.
E6X	Expansion card #1 connection error	An error has occurred in an expansion card or at its connecting terminals. Please refer to the manual for the expansion card for additional details.
E7X	Expansion card #2 connection error

 

NOTE: If an EEPROM error (E08) occurs, be sure to confirm the parameter data values are still correct.

 

View manual:

https://drive.google.com/file/d/1NG6hqXOQOIeA8CZRN4-hAi_92nSKF2lV/view?usp=sharing

For Spare Parts:

Orion AC&R Limited

10 Grisedale Court
Woburn Road Industrial Estate
Kempston
Bedfordshire
MK42 7EE
United Kingdom

Sales And Service: +44 (0)1234 841221 
Fax: +44 (0)1234 852662
Email: info@orionair.co.uk

Opening Hours:


9.00 to 17:00 GMT Monday To Friday