Aire acondicionado Inverter Fase del inspector

Aire acondicionado Inverter Fase del inspector

Funciona con todos los fabricantes con un análisis instantáneo y diagnóstico de fallas

 
El "inversor Fase Comprobar Módulo" es la respuesta perfecta de bajo costo a los problemas de un contratista cuando falla un acondicionador de aire inversor controlado. La dificultad es siempre para saber si es el compresor o el inversor que está dando problemas - y la comprobación del módulo inversor de fase puede ayudar a decirle que es defectuoso. Las conexiones de alimentación están desconectados del compresor, y están conectados a este módulo. Cuando el inversor se conecta las seis luces en el módulo debe encenderse rojo, amarillo y azul. Si el PCB inversor está defectuoso, una o más de estas luces no se enciende, y esto indica la posición de la falla. Es así de simple! Si los seis luces están encendidas, el PCB está muy bien, y la culpa es con el compresor. Si no están todos en, o una luz es significativamente más débil que el resto, entonces el fallo es con uno o más de los transistores de salida en la PCB, o con el circuito de accionamiento. El "inversor Fase Comprobar Módulo" es lo suficientemente pequeño como para caer en la caja de herramientas, y siempre ayudar con el análisis de los problemas en el lugar.Un kit de cables de conexión están disponibles para su uso con este indicador. Los tres conductores son cada 1 metro de largo y equipado con aislante de 1/4 "hembra sujeta el usuario para conexión al cuadro de indicadores. El" inversor Fase Compruebe Module "y los cables de conexión están diseñados para cumplir con la Directiva de baja tensión CE cuando se utiliza según las indicaciones en el folleto de instrucciones. Aunque es pequeño, no es la intención de ser de mano, y por supuesto todas las fuentes de alimentación debe estar activado de forma segura mientras se está conectado el módulo.
 

Características principales del producto:

• Analiza de forma instantánea compresor o inversor falla - en el sitio

• Se adapta fácilmente dentro de una caja de herramientas - sólo 81mm x 73mm x 28mm!

• Display visual rápida

• Kit opcional de cables de conexión están disponibles

• Cumple con la Directiva CE sobre baja tensión

• CE aprobado para el uso de hasta 440V inversores de 3 fases

Air Conditioning Inverter Phase Checker

Air Conditioning Inverter Phase Checker

Works with all manufactures with instant analysis and fault diagnosis

The "Inverter Phase Check Module" is the perfect low cost answer to a Contractor's problems when an inverter-controlled air conditioner fails. The difficulty is always to know whether it is the compressor or the inverter which is giving trouble - and the Inverter Phase Check Module can help to tell you which is faulty. The supply connections are disconnected from the compressor, and are connected to this module. When the inverter is switched on the six lights on the module should light up Red, Yellow and Blue. If the inverter PCB is faulty, one or more of these lights will not switch on, and this indicates the position of the fault. It's that simple! If all six lights are on, the PCB is fine, and the fault is with the compressor. If they are not all on, or one light is significantly dimmer than the rest, then the fault is with one or more of the output transistors on the PCB, or with the drive circuitry. The "Inverter Phase Check Module" is small enough to drop into the toolbox, and will always help with the analysis of problems on site. A Kit of connection leads are available for use with this indicator. The three leads are each 1 metre long and fitted with insulated 1/4" female Fastens for connection to the indicator box. The "Inverter Phase Check Module" and the Connection Leads are designed to comply with the CE Low Voltage Directive when used as directed on the Instruction leaflet. Although small, it is not intended to be hand-held, and of course all power supplies must be safely turned off while the module is being connected.

Key Product Features:

• Instantly analyses compressor or inverter fault - on site

• Fits easily within a toolbox - only 81mm x 73mm x 28mm!

• Fast visual display

• Optional kit of connection leads are available

• Complies with CE Low Voltage Directive

• CE approved for use up to 440v 3-phase inverters

Replacement Parts High Performance Vacuum Pump Models 15400 and 15600 Parts List

Replacement Parts High Performance Vacuum Pump Models 15400 and 15600 Parts List

Troubleshooting Guide

This Robinair pump has been designed for dependable use and long life. If something should go wrong, however, the following guide will help you get the pump back into service as quickly as possible. 

If dis-assembly of the pump is required, please check your warranty. The warranty may be voided by misuse or customer tampering that results in the pump being inoperable.

Check line voltage. Robinair pumps are designed to start at +10% line voltage (loaded) at 32o F. At extremes, however, switching between the start and run windings may occur. 

1. Verify the oil is not a residual accumulation from spillage, etc.

2. If leakage exists, the module cover gasket or the shaft seal may need replacing. Follow the instructions supplied with Seal Replacement Kit No. 15367. If leakage exists in the area of the oil drain plug, you may need to reseal the plug using a commercial pipe thread sealer.

1. Verify the Iso-Valve™ on the pump is in the OPEN position.

2. Verify the vacuum gauge and all connections are in good conditon and leak-free. Confirm leakage by monitoring the vacuum with a thermistor gauge while applying vacuum pump oil at connections or suspected leak points. Vacuum will improve briefly while the oil is sealing the leak

Parts List

Part	Figure	15400	15600
Oil Drain Cap (qty. 6)	1	40572	40572
Oil Drain Kit (includes oil drain cap)	2	48116	48116
Module Cover Kit (includes items 2, 4, 5)	3	15337	15337
Oil Fill Cap (includes gas ballast valve)	4	15371	15371
Intake Fitting (includes intake caps)	8	15364	555124
Intake Caps (1/4", 3/8", and 1/2" flare; 1 ea.)	9	555133	555133
Vent Bolt (includes o-rings)	11	15338	15338
Handle, Power Cord, Switch Assembly	12	15366	15366
Motor	13	15365	15370
Coupling	14	48103	48103
Iso-Valve™ Assembly	15	15368	15368
Base and Foot Assembly	16	15369	15369
Replacement Module (includes Nos. 1 through 7)	17	15547	15548
Seal Replacement Kit (not shown)	--	15367	15367

For Robin Air Vacuum Pump Parts Contact Info@orionair.co.uk