Fujitsu Air Conditioning Complete List Of Fault Codes For Wall Mounted Multi Room Models

Fujitsu Air Conditioning Complete List Of Fault Codes 

For Wall Mounted Multi Room Models

Initial Display                                                                                                   Further Interrogation by Pressing Test Button on Infra Red RC

Red	Green	Meaning	Red	Green	Meaning
2 Flashes	Blinks	ID Sensor Failure	Blinks	2 Flashes	ID Air Sensor
2 Flashes	Blinks	ID Sensor Failure	Blinks	3 Flashes	ID Pipe Sensor
4 Flashes	Blinks	ID Control Error	Blinks	2 Flashes	Manual Auto Button Error
4 Flashes	Blinks	ID Control Error	Blinks	4 Flashes	Power Source Failure
5 Flashes	Blinks	Communication Failure	Blinks	2 Flashes	Reverse Communication Failure
5 Flashes	Blinks	Communication Failure	Blinks	3 Flashes	Forward Communication Failure
6 Flashes	Blinks	ID Fan Failure	Blinks	2 Flashes	Motor locked
6 Flashes	Blinks	ID Fan Failure	Blinks	3 Flashes	Motor RPM Incorrect
Blinks	2 Flashes	OD Thermistor Fail	2 Flashes	Blinks	OD Discharge Sensor Fail
Blinks	2 Flashes	OD Thermistor Fail	4 Flashes	Blinks	OD Pipe Sensor Fail
Blinks	2 Flashes	OD Thermistor Fail	6 Flashes	Blinks	OD Air Sensor Fail
Blinks	2 Flashes	OD Thermistor Fail	8 Flashes	Blinks	Compressor Temp Sensor Fail
Blinks	2 Flashes	OD Thermistor Fail	9 Flashes	Blinks	2 Way Valve Sensor Fail
Blinks	2 Flashes	OD Thermistor Fail	10 Flashes	Blinks	3 Way Valve Sensor Fail
Blinks	3 Flashes	Pressure Switch	2 Flashes	Blinks	Pressure Switch
Blinks	4 Flashes	ID Units Incorrect	2 Flashes	Blinks	Incorrect Indoor Unit Index
Blinks	5 Flashes	Inverter Failure	2 Flashes	Blinks	IPM Failure
Blinks	5 Flashes	Inverter Failure	5 Flashes	Blinks	Compressor Failure

Contact Us With Your Spares Inquiry Below:

Call: +44(0)845 567 7080

E-mail: Info@orionair.co.uk 

Replacement Parts High Performance Vacuum Pump Models 15400 and 15600 Parts List

Replacement Parts High Performance Vacuum Pump Models 15400 and 15600 Parts List

Troubleshooting Guide

This Robinair pump has been designed for dependable use and long life. If something should go wrong, however, the following guide will help you get the pump back into service as quickly as possible. 

If dis-assembly of the pump is required, please check your warranty. The warranty may be voided by misuse or customer tampering that results in the pump being inoperable.

Check line voltage. Robinair pumps are designed to start at +10% line voltage (loaded) at 32o F. At extremes, however, switching between the start and run windings may occur. 

1. Verify the oil is not a residual accumulation from spillage, etc.

2. If leakage exists, the module cover gasket or the shaft seal may need replacing. Follow the instructions supplied with Seal Replacement Kit No. 15367. If leakage exists in the area of the oil drain plug, you may need to reseal the plug using a commercial pipe thread sealer.

1. Verify the Iso-Valve™ on the pump is in the OPEN position.

2. Verify the vacuum gauge and all connections are in good conditon and leak-free. Confirm leakage by monitoring the vacuum with a thermistor gauge while applying vacuum pump oil at connections or suspected leak points. Vacuum will improve briefly while the oil is sealing the leak

Parts List

Part	Figure	15400	15600
Oil Drain Cap (qty. 6)	1	40572	40572
Oil Drain Kit (includes oil drain cap)	2	48116	48116
Module Cover Kit (includes items 2, 4, 5)	3	15337	15337
Oil Fill Cap (includes gas ballast valve)	4	15371	15371
Intake Fitting (includes intake caps)	8	15364	555124
Intake Caps (1/4", 3/8", and 1/2" flare; 1 ea.)	9	555133	555133
Vent Bolt (includes o-rings)	11	15338	15338
Handle, Power Cord, Switch Assembly	12	15366	15366
Motor	13	15365	15370
Coupling	14	48103	48103
Iso-Valve™ Assembly	15	15368	15368
Base and Foot Assembly	16	15369	15369
Replacement Module (includes Nos. 1 through 7)	17	15547	15548
Seal Replacement Kit (not shown)	--	15367	15367

For Robin Air Vacuum Pump Parts Contact Info@orionair.co.uk