Mitsubishi Heavy Industrial - SRF-25ZJX-S Floor air conditioning

2.5kW / 9900 Btu (nominal run) Heatpump hyper Inverter Split Type floor mounted Air conditioning System.Buy at www.orionairsales.com

Inverter driven DC compressor

MITSUBISHI HEAVY INDUSTRIES has made a giant leap forward in air conditioning and heat pump inverter technology, with the latest introduction of high performance SRF-ZJX Floor Mounted air conditioning systems. The NEW ADVANCED SRF Floor Mounted Indoor Units are a new design with a flat/low profile flat appearance, and is very easy to keep clean. The SRF includes the Mitsubishi innovative NATURAL ENZYME FILTER which destroys funghi, bacteria and viruses. This, combined with the main Photocatalytic Washable Deodorizing Filter, provides healthy clean air for the occupants. MITSUBISHI has used its innovative technology of compressor design, and the ozone friendly R410A refrigerant, and combined this with their new high and low air movement fan arrangement for optimum heating and cooling. The result is a quiet, high performance cooling and heating system, with advanced electronic controls for maximum comfort, controllable and energy efficient. ZJX Series The recently introduced slim indoor unit has a reduced depth of 293mm. The new multiple stage heat exchanger is folded to form a surround to the upper section of the fan enclosure. This ensures low air velocity, and reduced sound levels, whilst delivering high performance and efficiency. The unit produces an amazing 4.70 x input or 4700 watts for 1000 watt input.

Auto Air Outlet selection

In heating mode: Both lower and upper outlets operate with Auto fan speed mode, the lower outlet will be kept for twenty minutes after the start or until room temperature is close to reaching the setting point. And then the air outlet will change to both outlets. That state will be maintained until the switch is turned off. Automatic adjustment of lower air outlet direction prevents stirring up of warm air and keeps optimum comfort at floor level. In cooling mode: In case both lower and upper outlets operation is selected in Cooling or Dry operation, both outlets will be kept for sixty minutes after the start or until room temperature is below the setting point. And then the air outlet will change to the upper outlet. That state will be maintained until switch is turned off. In case both outlets operation with Auto fan speed mode is selected, the upper outlet will be kept for ten minutes after the start or until room temperature is close to reaching the setting point. And then the air outlet will change to both outlets in order to spread comfort air to every corner.

3 year parts warranty

Product Key Feature's

• High CoP, up to 4.70
• New advanced technology control
• Infra-red controller with wall mounting bracket
• Reduced height slim construction
• Only 238mm deep

• Pipe runs up to 15 metres
• Low noise – 26dBA
• Back-up switch for loss of controller
• Cold draft prevention on heat pump
start up
• Fault diagnosis
• Auto re-start after power interruption
• PRE-CHARGED WITH REFRIGERANT for
up to 15 metres pipe length

• Auto air direction with high and low air outlets for cooling/heating operations

SRF Floor Mounted SRF25ZJX-S
Power source 1 ph 240v
Type Hyper Inverter High C.O.P
COOLING (nominal) max. kW 3.0
HEATING (nominal) max. kW 4.7
UK Cooling (max) kW n/a
UK Sensible Cooling kW 2.5
E.E.R. 5
Energy label in heating A
Energy label in cooling A
C.o.P 4.70
ECA - Yes

INDOOR UNIT

Exterior dimensions (mm) 600 x 860 x 238
Net weight kg 18
Sound Pressure Level* (cooling) dB(A) 40/31/26
Sound Pressure Level* (heating) dB(A) 40/31/26

OUTDOOR UNIT: SRC25Z1X-S1
Exterior dimensions (mm) 595x840x290
Net weight kg 38
Power Source Rating MCB A 10A
Refrigerant max piping length m 15
Pipe sizes - 1/4" x 3/8"

OrionAir: Air Conditioning and Refrigeration(sales/service)

OrionAir: Air Conditioning and Refrigeration(sales/service): "- Sent using Google Toolbar"

Fuel Cell Micro CHP units have the edge over Air Source heat pump options

Fuel Cell Micro CHP units have the edge over Air Source heat pump options


With the introduction over the next few years of the micro CHP unit based on fuel cells where the unit combines heating the building with electricity production the heating market is on the cusp of a whole new technology and combining of building trades.

BlueGen is the latest breakthrough in small scale electricity generation - a modular style fuel cell generator that can be configured to suit a range of different markets and installations. For markets that require an alternative product approach to fully-integrated 'European style' systems, such as Japan, Northern America and Australia - BlueGen™ bridges that gap.

The Bluegen comes with the added bonus of sell back to the grid incentives such as the MCS in the UK. Germany offers incentive to buy the new fuel cell units as well as sell back to the grid incentives. The fuel cell units need a natural gas supply where the Air source heat pumps require electricity and produce heat from the outside air with operating ranges down to -20 DegC. In very cold weather they do have their limitations.

Bluegen Data can be found here

Air Source Heat Pump Data can be found here

Currently Not Available In The UK or Ireland