Showing posts with label Heater. Show all posts
Showing posts with label Heater. Show all posts

Tuesday, 21 January 2014

Bed Bug Killing Electric Heater 240V (3Kw / 12000Btu) With Controller And Remote Thermostat


Bed Bug Killing Electric Heater FF3BBK 240V (3Kw / 12000Btu) With Controller And Remote Thermostat

The Broughton bed bug killer heater is designed to rid occupied rooms in hotels, penal facilities and residential areas of the irritation of bed bugs. The bed bug killer heater has been designed and tested to heat the affected area to a designated temperature for the applicable duration of time. Manufactured with high temperature components and a remote thermostat so the system unit can be ducted / mounted outside a affected area. The FF3BBK heater is defined by its large heat output, whisper quiet operation and unrivaled durability and has become industry standard over the last few years, found in many of the continents most established hire fleets

The Blue Giant Series has been upgraded with a number of unique features:

  • 3kW of heat from a 13a supply
  • Temperature and duration pre-set
  • 240v / 50hZ
  • ​Suit room 20 to 25 SQM

Technical Specification:
 
Nominal Heat Output
3kW
Supply
230v 13a 1ph
HxWxD (mm)
360x300x330
Max Airflow/Pressure
423m3/hr 80pascals
Weight
10kG
Max Duct/Outlets
3m/1

Running cost = 2.8 units of electricity per hour

Monday, 30 January 2012

9KW Industrial Space Heater

9KW Industrial Space Heater:

Features & Benefits
  • 9kW space heater
  • Adjustable 3kW, 6kW & 9kW heat output
  • Robust construction
  • Steel cabinet with enamel finish
  • Adjustable thermostat
  • Encapsulated stainless steel heating element
  • Safety thermostat prevents overheating
  • Insulated handle for safe handling
  • Weight 13.5kg
  • 1 year’s warranty
  • Dimensions H420mm x W250mm x D250mm
  • 3 phase

'via Blog this'

The Big Red Rad - 3kw Industrial Radiant Heater

The Big Red Rad - 3kw Industrial Radiant Heater:

Features & Benefits
  • 3kW industrial heater
  • 2 heat settings - 1.5kW & 3kW
  • Very tough, durable construction
  • High heat output
  • Quick to heat
  • Wide handle
  • Single phase power
  • Standard three-pin plug
  • 2.5m cable
  • Safety tip-over cut-out
  • Lockable wheels for easy positioning
  • Approximate running cost of 30p an hour (based on a unit of electricity costing 10p)
  • 1 year’s warranty
  • Dimensions H885mm x W550mm x D490mm

'via Blog this'

5KW Industrial Space Heater

5KW Industrial Space Heater:

Features & Benefits
  • 5kW space heater
  • Adjustable 2.5 & 5kW heat output
  • Robust construction
  • Steel cabinet with enamel finish
  • Adjustable thermostat
  • Encapsulated stainless steel heating element
  • Safety thermostat prevents overheating
  • Insulated handle for safe handling
  • Weight 7kg
  • 1 year’s warranty
  • Dimensions H420mm x W250mm x D250mm
  • 3 phase
Recommended use: small to medium sized commercial or industrial areas or garages.

'via Blog this'

Thursday, 12 January 2012

Electric Patio Heaters New From ChillChaser




Slim Aerodynamic Construction – doesn’t blow over like gas


The ultra slimline design is manufactured from 3.5mm extruded Aluminium which is car painted in heavy duty weather resistant paint (UV Protected for outdoor use). All other parts are either aluminium or stainless steel to further enhance the longevity and weather beating properties of the unit. For long periods of inactivity we recommend using the weatherproof cover (which is
included in the box) and storing in a secure dry location.



3.5mm Gage Extruded Aluminium Construction – never rusts!

60/60 Aluminium extrusion is the top grade produced in UK– it is lightweight and very durable with tremendous anti–corrosion properties. In fact 98% of all Aluminium ever produced is still in existence! Therefore, our Chillchaser® heaters can be 90% recycled at the end of their lives.

Commercial quality design and build – Suitable for all premises!

From Aberdeen Scotland to Christchurch New Zealand our heaters are being used as spot heaters in a huge variety of outlets and factories. We even have 10 on an oil platform in Algiers!

Carbon fibre tubes – Far-Infra-Red heating – The light of Life!

2 heat settings: 1500w & 3000w or for certain EU countries a lower power rating 1200 & 2400W (i.e France & Sweden) Uses a standard 220-240V 50Hz AC electric supply: No heavy gas cylinders or harmful Gases Also available soon with 120V – 50/60Hz for USA, Canada & Japan. Carbon fibre technology is derived from the technology used in hospitals to treat circulation disorders and skin complaints. It has been proven to be the most natural, versatile and healthy form of heat. Far Infra-Red heat combines to maintain body vitality and increase metabolic functions without any detrimental effects. Wavelengths of 0.8 to1.4 microns are the optimum energy wavelengths absorbed by the human body making Carbon fibre the ideal heating medium for indoor and outdoor heating....the heat rays developed by the carbon fibre tubes provide infrared heat which heats people. These tubes DO NOT HEAT THE AIR!
Tube life extends to approximately 6000 - 8000 hours; over 4 years life at an average of 5 hours per day operation.

Energy Saving lights – no need for Power-Hungry floodlights!

Some models have a high lumen energy saving 25W CFL lamp as standard (options also available; 15W). Lamp life approximately 6000 hours; over 4 years life expectancy at an average of 5 hours per day operation. 25,000hr LED lamps will be introduced on-going in 2012/13.

Low Running Costs 33p/hour - compare £4.50/hour for gas heaters

In full maximum heat operation ChillChaser® units draw up to 3Kw of power per hour. Because they only heat people and not the air they are not affected by the wind. Efficient power-heat conversion of 95%. Average UK electricity costs are approximately £0.11 per Kw/hour, giving the unit an approximate running cost of £0.33 per hour when in full operation (both
heating tubes plus light). However, when using the PIR economy button this is further reduced hence reducing the energy costs even further. Compare this running cost against the cost of frequently replacing gas cylinders in your area = £4.50/hr.? What is the cost saving? = £4.17 every hour of use. What is the reduction in Carbon Emissions? = at least 70%

RadarSense™ PIR economy feature - Reducing energy costs even further!

PIR (Passive Infrared) economy feature automatically turns off the heater when there is no movement by any person in front of the unit from 30secs-4 minutes. The unit will automatically switch back on when it detects movement by a person in its vicinity. This obviously saves considerable energy and money. It also frees up the owner to carry on without worrying about the wasted
energy.

Silent Running – Unlike Gas our heaters have No Noise!!

Nothing is worse than the horrible roaring racket of a gas patio heater smell when you are trying to eat or drink Alfresco - simply replace them with our ChillChaser® Heaters and enjoy peace, tranquillity and warmth!
Odourless – Unlike Gas our heaters have Zero emissions!!

Nothing is worse than the smell and fumes coming from a gas patio heater when you are trying to eat or drink Alfresco - simply replace them with our ChillChaser® Heaters and avoid customer complaints (at least about the heating).

Masterlock™ Safety feature – No tampering by Children or public!

This function disables the main unit control panel to render it inoperable / tamper proof. In operation the unit is then managed by the remote control only.

Remote control - For an easy life!

“Full Function” remote control that pops easily into the rear handle or rear door of the unit for safekeeping. Weather-proofed – IPX5 rating means “OK to leave outside”!

These units have patented weather proof fittings that have enabled the award of an IPX5 rating, which means that it is produced to be left outside and will not be affected by weather conditions, specifically water ingress. The heating tubes are installed in such a manner that they can take direct exposure to water, beer or even flammable liquids like whisky or Vodka! Recommended operating temperatures have been tested from -20°C in Moscow to +25°C, although our heaters will automatically cut off at 25degC to save wasting energy.

Effective Heating Area – Head to Toe People heater NOT the Air!

The effective heating area of one unit is approximately 24m (5m radius from the unit at a heating angle of 110 degrees); the intensity of the heat is obviously greater the closer you are to the heat source / unit. Looks spectacular at night with that “bonfire red glow” without the smoke and pollution!

EasyFit™ Base – Simple 1-Nut assembly to a one piece base!

The Heavy weight base of 15Kg is easy to assemble with a simple one nut & washer method. This base is designed to self-right even at 25° and withstand heavy winds or the odd drunk who may knock against it!

Safety Features– Easy to insure for public Liability Insurance!

Safety tip-over switch built in to the unit, which cuts all power if the unit is knocked accidentally. No naked flames that can ignite chemicals or flammable liquid such as whisky. NB: - It won’t light cigarettes! Chillchaser Heaters have a corrosion resistant Protective Zinconium grille for safety, which whilst it does get warm in operation, will not scald/burn on contact, due to the way in which the carbon fibre tubes produce their effective heat output.
Chillchaser® Heaters are also fitted with an Auto-Reset Thermal Fuse which shuts down the unit in an overheat situation.

Safest Heater of its type on the market, for children, pets and the environment. Lockable Cable Storage Door – Safe to store the 5m of cable and hide your remote control for safety Protect your remote from theft or loss by storing it in the rear door compartment – store the cable in here when not in use.

Roller Base – Easy to move into the desired area or position!

Handle and base with rollers for easy mobility. The unit can however be bolted in position, if required. (Rawl fixings & armoured cable required)

Low Carbon Emission Heating - Certificate and Logo

Zeus, Neptune, Mercury, Hercules, Titan, Jupiter & Artemis heaters lower Carbon emissions by at least 70% compared to a gas heater and are now available as a carbon offset heater at a cost of: £10.00 per year for 1000 hours commercial use.

Warranty and Certifications – Trust the quality!

The unit is under warranty for 2 years under normal domestic using conditions & 1 year for Commercial applications. Full legislative testing procedures have been undertaken and awarded; CE, GS, ETL, IP, RoHS.... copy certification available on request. More than 15,000 units have been sold to date with <1% faults reported and all easily corrected due to the modular construction and ease of fitting replacement parts.

Thursday, 21 April 2011

Massive storm rips through factory that manufactures the Mercury and Neptune patio heaters


















A massive storm rips through factory that manufactures the Mercury and Neptune patio heaters. The factory in Shunde, Guangdong Province China experienced great deal of damage.


A massive storm ripped through buildings and caused major damage to houses and factories in the area. The roof housing the Neptune and Mercury Patio heaters which were due to be shipped that day was hit by a massive storm surge which brought it down on to the patio heaters causing $1000's worth of damage to many of the products. The Neputune and Mercury patio heaters are ideal for heating a patio without having to burn gas to heat area, this saves the user from having to get bottled gas. The Neptune patio heater is the biggest of the range and comes with built in light and energy saving movement sensor (PIR) as standard to switch off and on when people are present. These patio heaters are completely water proof and ideal for gardens and terraces.

About the Neptune and Mercury Patio Heater


This new style of patio heater became a well known product after the inventor Eddie Middleton presented it to the "Dragons" on the BBC TV series "Dragons Den" where all the dragons were very impressed with the product but for various reasons they never ended up investing. Eddie Middleton subsequently took the product to market himself and now distributes the patio heating range worldwide. The Neptune and the Mercury Patio heaters are available at www.orionairsales.com

Friday, 18 March 2011

Heat pumps are bringing benefits to our Commercial buildings

With the excitement being created by rapidly growing application of heat pumps in the residential sector to replace conventional central heating boilers, it is often mistakenly thought that this is a recent innovation, this is not the case; heat pumps have been with us for over 50 years, indeed they are a dominant feature in the commercial buildings sector.


What we are seeing in the residential sector is the emergence of air or ground source-to-water heat pumps, which can satisfy space heating and domestic hot water requirements utilising conventional heat emitters - radiators, fan coil units or underfloor heating and hot water storage cylinders. Heat Pumps being part renewable, part electric technology, achieve far greater operating efficiencies than all electric or fossil fuel (gas or oil), combustion based boilers. Heat pumps have been recognised as being capable of helping us reach our carbon emission reduction targets not to mention greatly reducing our household heating bills.

In the commercial sector the pre-eminent heat pump is the air source air-to-air type, which can satisfy the space heating and cooling requirements, however, the sanitary hot water services are still mainly provided by secondary systems such as all electric or gas/oil fired boilers.

Pre 1990's most commercial buildings were cooled by air or water-cooled chillers circulating chilled water to wall mounted or ducted fan coil units and heated by conventional 'wet' central heating systems, either utilising the same fan coil units or radiators. In the mid 1980's, Daikin Industries developed an ingenious new heat pump technology called Variable Refrigerant Volume or VRV. This revolutionised the commercial air conditioning market because, for the first time there was a single system that could efficiently cool and heat commercial buildings, reducing dependence on energy guzzling boilers, which would now only be needed, in smaller capacities, for providing hot water.

What's more, VRV could offer simultaneous cooling and heating from the same system by re-distributing waste or rejected heat that would otherwise discharged to atmosphere! VRV offered many other benefits apart from superior energy efficiency, it was a modular concept so proved much more flexible in terms of the space it occupied and in programming the installation works.


Daikin Air Heat Pumps












Electrical loads were reduced and the speed with which VRV was able to respond to demand was far quicker than any chilled water/secondary heating system.
No surprise then that modular VRV (and later derivatives known as VRF) overtook central chiller systems in terms of popularity in the commercial sector.

However, certain commercial applications remain better suited to chiller systems, for example in large areas with a single temperature set-point or where response times are less critical, spaces with larger cooling loads or very high ceilings.

So has chiller development learned any lessons from the success of VRV? - Heat pump chillers have also been available for some years but at a premium that hindered their success. Such chillers could only operate in cooling or heating. In heating mode, there were limitations and in certain conditions a secondary heating source would still be required to satisfy the heating demand. This has been largely resolved with the more recent introduction of inverter technology (which VRV/VRF had adopted years earlier). Inverter technology enables the heat pump chiller's compressor/s to be boosted, in more extreme conditions, with a frequency increase that exactly follows the required thermal load, resulting in a wider operating range and reducing or eliminating the need for secondary heating.

Heat recovery, heat pump chillers manage to get a little closer to VRV/VRF capabilities because, the chillers offer cooling and heating as before - but - in cooling mode, heat absorbed from the conditioned space and from the compressors, instead of being rejected to atmosphere, is recovered and directed to a second heat exchanger. The recovered heat energy can then be used in areas calling for heating or passed to a thermal storage facility for hot water. In this way chillers can offer simultaneous heating and cooling, a common requirement in commercial buildings, at remarkably high efficiencies.

To manage the heating and cooling requirements of our commercial buildings it's not so much a question of why install heat pumps rather than other technology? More the fact that no other systems offer anything like equivalent energy efficiency and cost effectiveness. A fact that we in the industry trust will be acknowledged in the government's soon to be announced Renewable Heat Incentive.

Tuesday, 22 February 2011

Heat Screen Air Curtain RM125-15-D/Y-A (9kw/30000Btu) 1500mm

The Heat Screen air curtain is easy to install, only requires a single phase power supply and has an integral control system. This makes it ideally suited to small shop entrances, cafés, restaurants, hotels or other public entrances where an overdoor heater is not sufficient but a three-phase air curtain is too expensive.


Key Product Features:

High performance
Economic to run
Three lengths in the range
Single phase power 240V
Remote control operation (see picture)
Fast acting heating elements
Safety overheat protection
3 minute run-on to remove residual heat
One year warranty



Product Technical Data:

Dimensions: L1500mm x H221mm x D183mm
Weight: 22.9kg
Fan power: 300W
Heating power: 9kW
Current: 41A (fused isolator)
Voltage: 230V / 50Hz
Air velocity: 6-7m³/h
Air flow: 1,670m³/h
Noise: 65dB
Product code: RM125-15-D/Y-A

Thursday, 17 February 2011

Poseidon Patio heater with Media Player (as seen on Dragons Den)

Poseidon Patio heater with Media Player (as seen on Dragons Den)

The Poseidon’s stunning contemporary slim-line design stands 6.5 feet tall and has a robust all metal design suitable for domestic and commercial spaces such as gardens, patios, balconies, garages, pubs, smoking areas, clubs and bars. Poseidon's patented carbon fibre heating tubes significantly reduce running costs and cuts carbon dioxide emissions by 50% compared with gas patio heaters.
Poseidon media player is a unique patio heater innovation that takes outdoor entertainment / advertising to a NEW level. The IPX5 weatherproof media player features a super bright high resolution LCD display that is perfect for all your videos, pictures and music. Audio is also catered for via the inbuilt speakers. The built in USB port enables you to run video and audio from your memory sticks. You can also plug in your MP3 players and i-pods using the 3.5 input socket.
The PIR economy feature enables the Poseidon patio heater to automatically switch on and off depending on activity near the unit. When enabled, the PIR sensor constantly monitors peoples’ movements up to a distance of 4 meters and if after 4 minutes it does not detect movement it will switch off. Thereafter, if the PIR sensor does detect movement it will automatically switch on at the original settings. This economy function optimises energy usage and minimises CO2 emissions even further than the 50% already indicated – making Poseidon the most efficient and eco-friendly heater in the world.
Instant heat with two heat settings - 1350W / 2700W. - the elements are replaceable & designed to last 8,000 hours. Far Infrared Electric heaters offer more focused heat, heating people rather than the air and emit zero CO2 exhaust gases unlike gas patio heaters. Far Infrared carbon fibre heating is used worldwide in hospitals for many problems as it is one of the most natural, versatile, and healthy form of heat. FIR heat helps maintain body vitality and increases metabolic function without side effects. Comes with a heavy-duty, all weather paint finish.
Easy Mobility: Built in rollers and pull handle facilitate easy mobility around patio areas. poseidon also features a storage compartment for tidy cable management.

The magnetic remote enables you to simply attach it to the body of the heater


Key Product Feature’s
· Robust all metal design
· Standard 220 - 240V electric (Also available as a 100-120V version)
· IPX5 weatherproof design.
· Latest carbon fibre heating technology to produce ‘far infrared heat’
· Instant heat with two heat settings - 1350W / 2700W
· Elements are replaceable & designed to last 8,000 hours.
· Effective heating area of up to 4 metres at 110 degree angle.
· No harmful fumes unlike most gas patio heaters.
· Safety tip-over & Auto reset thermal cut-off device
· Media player
· Carbon fibre heating
· PIR infrared sensor / Powerful 40W CFL low energy light with four position adjustable head.


Main body material

Metal

Power - Heat (kW)

2.7

Voltage (V)

220-240

Frequency (Hz)

50

Protection class I or II

I

Plug Amp (A)

13

Net weight - product (kg)

28.3

Gross weight - retail box (kg)

31

Gross weight - outer carton (kg)

-

Product dimensions (HxWxD cm)

210x33x33

Retail box dimensions - (HxWxD cm)

206x33x32

Neptune 2.3kw Patio heater with magnetic remote control (as seen on Dragons Den)

Neptune 2.3kw Patio heater with magnetic remote control (as seen on Dragons Den)

As seen on BBC's Dragons Den! "This is the future of patio heating" Peter Jones

The Neptune patio heater is the biggest of the range and comes with built in light and energy saving movement sensor (PIR) as standard to switch off and on when people are present. The Neptune is completely water proof and ideal for gardens and terraces. Includes remote control and optional zip up weatherproof storage cover. The Neptune patio heater has two stages of heating and is coated in hammerite paint for heavy duty protection. The Neptune patio heater comes with a 2 year warranty.

Key product Features:

* IPX5 outdoor rated - (outside and exposed to direct water whilst turned on)
* 2 heat settings
* Built in light
* Full remote control
* Movement sensor (PIR) to switch unit on & off when people not present
* Rollers on base for easy mobility
* Auto tip over power cut-out
* Optional zipped cover for storage
* Heavy duty protective hammerite coated

Specification:

* Dimensions HxDxW: 178 x 50 x 50 cm
* Weight: 29kg
* Voltage: 220V-240V / 50Hz
* Cable length 1.8M
* Heating power: 2 settings -1150W & 2300W
* Lamp power: 25W
* Warranty: 2 years

Zeus 2.8kw Patio heater with 40w light and magnetic remote control (as seen on Dragons Den)

Zeus 2.8kw Patio heater with 40w light and magnetic remote control (as seen on Dragons Den)

As seen on BBC's Dragons Den!

The Zeus 2.8kw Patio heater with 40w light and magnetic remote control is a new way to heat a patio area instead of using gas systems.Designed for the commercial market it also incorpartes a 40w low energy light on top with a energy saving PIR sensor and zipped cover for transit and weather protection. Effective heating area of up to 4 metres at 110 degree angle with no harmful fumes unlike most gas patio heaters. The unit has a economy feature which will turn the heater off after 4 minutes if no-one is present. The Zeus patio heater was featured on Dragons Den.

Key Product Features:

* 2.8KW Heating
* 40W CFL low energy light & 4 position adjustable head
* PIR sensor
* Economy feature - will turn the heater off after 4 minutes if no-one is present
* safety tip-over & thermal cut-out protection
* IPX5 Weatherproof design - Zipped cover also for transit and weather protection
* Magnetic remote control - attached to side of unit.
* Effective heating area of up to 4 metres at 110 degree angle.
* No harmful fumes unlike most gas patio heaters.
* Coated with heavy duty, hammered outdoor paint for long lasting protection.
* Rollers for easy mobility

Specification:

Main body material


Metal

Power - Heat (kW)


2.7

Voltage (V)


220-240

Frequency (Hz)


50

Protection class I or II


I

Plug Amp (A)


13

Net weight - product (kg)


28.3

Gross weight - retail box (kg)


31

Gross weight - outer carton (kg)


-

Product dimensions (HxWxD cm)


210x33x33

Retail box dimensions - (HxWxD cm)


206x33x32

Dura 7 + Swimming Pool Air Heat Pump Heater (7 kw / 24000 Btu) Low Operating Temperature

www.orionairsales.co.uk

Dura 7 + Swimming Pool Air Heat Pump Heater (7 kw / 24000 Btu)

DURATECH® heat pumps utilize the sun’s free heat by collecting and absorbing energy from the outside air. This energy is then transferred to the pool water. Your existing pool pump circulates the water through the heater and warms the pool. The unit contains a fan that draws in outside air and directs it over the surface of the EVAPORATOR (energy collector). The liquid refrigerant within the EVAPORATOR coil absorbs the heat from the outside air and the refrigerant becomes a gas. The warm gas passes through the compressor where it is compressed to form a very hot gas, which then passes through the CONDENSOR (water heat exchanger). It is here that the heat exchange occurs as the hot gas gives up the heat to the cooler swimming pool water circulating through the coil. The pool water becomes warmer and the hot gas is cooling down as it flows through the CONDENSOR coil, returns to its liquid form and, after passing through the expansion valve, the whole process begins again. The use of a highly efficient, low sound rotary or scroll compressor, a low noise fan and an oversized heat exchanger, makes the unit to be extremely quiet in operation. Example: the DURA 8 at 10m distance gives only 32 db(A). The Dura range comes in two formats the standard and Dura+ range, the key differences being the Dura+ range will work down to a lower outside temperature -10*c and have a higher COP range over their operating temperature.

Key Product Feature's:

# Model: Dura 7+ (Output 7KW)
# Works down to outside air temperature -10*c
# Maximum pool volume 30 m3
# COP @ air temperature 25*c = 5.8
# Volts 220-240V single phase
# Maximum input current 6.5 amps
# Noise level 50db
# Refrigerant R410A
# Nominal water flow m3/h = 3
# Water connections 50mm
# Dimensions: L905, W420, H650
# Weight 55Kg



The unit is intelligently designed and remarkably compact for easy installation. The heat pump has to be installed on a by-pass after the filtration pump.

www.orionairsales.co.uk : The unit is intelligently designed and remarkably compact for easy installation. The heat pump has to be installed on a by-pass after the filtration pump.

The integrated microprocessor monitors all the sensors and controls the device without any intervention of the user. Electronic display and control with easy operation is standard. The integrated flow switch will sense the water flow and automatically start the heater when the pool pump starts and stops when the pump shuts off.

www.orionairsales.co.uk: The integrated microprocessor monitors all the sensors and controls the device without any intervention of the user.