Orionair IO220V Retro-fresh Air Conditioning and Duct Ioniser 110V-240V~50Hz

Orionair IO220V Retro-fresh Air Conditioning and Duct Ioniser 110V-240V~50Hz: 

The Orionair IO220V High Output Air Ioniser Airborne Negative Ion Generator For HVAC and Ducts. Ideal for degrading odours, bacteria and airbourne viruses.

The Orionair IO220V Retro-fresh air conditioning ioniser is an easy fit solution for air conditioning systems, HVAC ducts or areas with stale air and re-occurring odour problems. It is designed to be fitted to any type of air conditioning unit including cassette, wall, floor, ceiling and ducts where 220V power is available. The black and red power cable is wired into terminals 1+2 on most air conditioning systems and the emitter point is fitted with a useful clip to fit onto a grille or screwed into a suitable fixing point. The IO220V ioniser will cover up to a 45 square meter area.

Key Product Features:

• Increase the freshness feeling of the room by realising ozone
• Eliminates smoke, pollen, dust, etc
• Degrades bacteria and viruses

Specifications:

• Material: ABS plastic with Silicone Line
• Type: Double-headed with bracket
• Applicable Area: 20-45㎡
• Air Purifier Volume: 50m³/h
• Input voltage: AC 220V
• Negative ion concentration: ≥424PCS/cm³
• Rated Power: ≤1W
• Input Current: ≤20mA
• Ozone Concentration: ＜0.05PPM
• Working Temperature: -10degree Celsius~50degree Celsius
• Working Humidity: 35%~85%
• Storage Temperature: -20degree Celsius~50degree Celsius
• Dimension: 27mm x 15mm x 18mm   /   1.06 x 0.59 x 0.71 inch

Using river water to heat a river boat?

River water can be utilised to heat a boat and in the past systems using copper coils in the water have been used in conjunction with heat pumps. However, rules and regulations and the lack of available manufactured equipment have made this type of system less attractive.

Pumping river water through a heat pump can give very good results, but heat pump units require water at temperatures above 5 to 8°C (varying depending on type). Whilst delivering very high-efficiencies for much of the time, this system may fail to operate in the middle of winter during lower temperatures- just when you need the most heat, so a back-up heat source is usually advisable.

Oxygen and contaminants in the river water may also be a concern in some circumstances, causing pump failure and possibly a system refrigerant leak. But don't let me put you off; this system can give excellent results if installed correctly.

For those lucky enough to have a spring, this is a much more stable and better heat source. Its an opportunity not to be overlooked, offering excellent efficiencies. Again, acidity and impurities in the water can sometimes make its use prohibitive, but some heat pump units will tolerate ‘corrosive’ water (some Dimplex models etc). A possible alternative is to use an intermediate heat exchanger in such circumstances. However, the added temperature drop and necessary extra pump can reduce the performance considerably.

The water source should ideally be fairly close to the property, and should not require pumping up any significant height or the power for pumping it may detract from the energy savings. Having said that, water could be taken over considerable distances if the pipe diameter is big enough, especially in a downward direction. It is a relatively simple exercise to calculate the pump power required (if any) to get the water to and through the heat pump unit.

Permission should be sought from the relevant authorities as an abstraction licence may be needed.

Produced by John Cantor

Broughton MCWC250 7.3kw (23000 btu) Industrial High Output Portable Air Conditioning 110v/240v

The Broughton MCWC250 heavy duty portable/mobile air conditioning units offer versatility with rugged design and stylish looks. These easy to use units are built to cope with industrial/commercial environments while not looking out of place in the office or boardroom. The massive cooling abilities allows them to be used for spot, comfort or process cooling.Uses a single vent heat exchanger with capabilities of up to 35 Meters discharge.


Key Product Features:
Manufacturer Broughton
Model MCWC250
Refrigerant Green R422d
Separate Heat Exchanger, up to 35meters away
Rating 7.3Kw, 25000 BTU's
Water Cooled Yes
Thermostat Yes
Portable locking castors
Air Flow 1450 Cubic Meters per Hours
Running Current (Amps) 11
Noise 60dbA
Weight (Kg) 86
Dimensions (HxWxD) 1350x820x380 mm
Power Supply Standard Domestic 13amp
Warranty 2 Years
Price includes VAT and 12 month manufacturer's guarantee

Buy On-line at www.orionairsales.com